Sensor


Open Amperometric Cells Measure: Free chlorine (organic and inorganic) for fresh water, salt water Range: Max 10 mg/l with flow stabilizator	Closed Amperometric Cells Measure: Free chlorine (organic and inorganic) for fresh water, Total chlorine, Chlorine dioxide, Hydrogen peroxyde, Ozone, Peracetic acid, Bromine	pH Probes Range: 0-14 pH Pressure: Max 7 bar Temperature: 70 °c


ORP Probes Range: ±1000 mV Pressure: Max 7 bar Temperature: 70 °c ORP for Low Cl2 Concentration	Conductivity probes - High linearity - With Graphite Electrode - With SS Electrode - SS Conductivity probes Range: Max 500 mS Pressure: Max 15 bar Temperature: Max 200 °c	Inductive Conductivity probes Range: Max 300 mS Pressure: Max 8 bar Temperature: 85 °c


Dissolved Oxygen probes Range: 20 mg/l Pressure: Max 10 bar Temperature: -5 - 50°c	Turbidity probes Range: 0/9.999 NTU (3,000 ppm) Pressure: 6 bar Temperature: 25 °c	Temperature probes Range: Max 100 °c Pressure: 10 bar


Off-line probes holders Working temperature 0°/50° C Maximum pressure 5 bar	Off-line probes holders for closed amperometric cells	Manifold With flow sensor as well as housing for the condiuctivity probe. Optional motorized valve, two injection pints and even additional measurement probes. Maximum pressure 8 bar Maximum temperature 75° C


In-line probe holders	Filters Maximum temperature 60° C (30° C NFIL/CA) Filtration degree 60 µ/150µ	Immersion probe holders Optional compressed air or water self cleaning system (automatic or manual control).

Open Amperometric Cells